6/15/2023 0 Comments Kawasaki kmx 125 ersatzteileSome 400-600 grit wet and dry sandpaper strips rolled into a tube should reach the male and female pins in the more difficult to clean connectors. However, when encountering the green crud of corrosion, a brass wire brush may be needed on the pins you can reach. Usually disconnecting, spraying with De-Oxit and reconnecting is about all you'll need. On the older Kawasaki's, a majority of electrical connectors are inside the headlight housing requiring removal of the headlight, then the fun begins.ĭo one set of electrical connectors at a time to avoid mixing up what connects to where. It can be purchased at Radio Shack Stores and other electronic supply places. It’s a plastic safe cleaner/preservative. Get some of the De-Oxit electrical contact cleaner and figure on spending a good day going from the front of the bike to the back. Dirt bikes get much more of a chance of corrosion on electrical connectors than street bikes, but the cleaning is about the same:
0 Comments
Leave a Reply. |